Signs Your Edgebander Gluepot Needs a Rebuild

A gluepot is usually due for a rebuild when the glue line turns uneven, the gluepot heats up slowly or won't hold temperature, or glue starts scorching and charring on the walls. Rebuilding before it fails costs less than a breakdown mid-run.

The warning signs

  • Uneven glue line: the edge doesn't get a steady, even coat of glue.

  • Slow heat-up: the gluepot takes longer than it used to before it's ready to run.

  • Won't hold temperature: the temperature drifts while you're running.

  • Scorched or charred glue: glue burns and builds up on the walls of the gluepot.

  • Heater or probe trouble: a heater or temperature probe has failed or reads wrong.

Why rebuild before it fails

A gluepot that fails mid-run stops the edgebander and the work behind it. A planned rebuild, for example during a holiday shutdown, gets it back before you start up again. Our standard turnaround is 2 weeks, or 5 days expedited.

What a Metride rebuild does

Every gluepot is drained, burned off, blasted, inspected, frame straightened, recoated with a high-temperature non-stick ceramic coating, rebuilt with new hardware, and given a final adjustment and test, to meet or exceed OEM. We replace heaters and probes only when they are worn or when you ask, so you don't pay to throw out good parts. Every rebuild carries a 5-month warranty that starts the day you install your gluepot.

Email contact@metrideus.com with your make and model, or call 616.541.4131.

More about our gluepot rebuilds →